How do I get into BIOS on ASUS Vivobook 17?

While the computer isn’t powered on yet, press and hold the [F2] button of the keyboard, and then press the [Power button] (Do not release F2 button until the BIOS configuration display.)..

How do I get into ASUS BIOS?

You can access the BIOS from the boot screen using a specific keyboard combination.

1. Turn on the computer or click “Start,” point to “Shut Down” and then click “Restart.”
2. Press “Del” when the ASUS logo appears on the screen to enter the BIOS.

How can I enter BIOS if F2 key is not working?

How can I enter BIOS if F2 key is not working?

1. Make sure the system is off, and not in Hibernate or Sleep mode.
2. Press the power button and hold it down for three seconds and release it. The power button menu should display. …
3. Press F2 to enter BIOS Setup.

What key is for BIOS?

Get ready to act quickly: You need to start the computer and press a key on the keyboard before the BIOS hands over control to Windows. You have only a few seconds to perform this step. On this PC, you’d press F2 to enter the BIOS setup menu.

How do I force open BIOS?

To boot to UEFI or BIOS:

1. Boot the PC, and press the manufacturer’s key to open the menus. Common keys used: Esc, Delete, F1, F2, F10, F11, or F12.
2. Or, if Windows is already installed, from either the Sign on screen or the Start menu, select Power ( ) > hold Shift while selecting Restart.

How do I navigate BIOS without arrow keys?

Here’s the solution below:

1. During boot up press F2 or DEL button to access the bios menu.
2. While on bios menu you find the Load Setup Default below the menu you can press F9 to do this, this function is to restore your bios to its default setting.
3. Then press F10 to save the changes on bios.

How do I navigate to BIOS without keyboard?

Navigate to settings.

1. Navigate to settings. You can get there by clicking the gear icon on the Start menu.
2. Select Update & security.
3. Select Recovery from the left menu.
4. Click Restart Now under Advanced startup. …
5. Click Troubleshoot.
6. Click Advanced options.
7. Select UEFI Firmware Settings. …
8. Click Restart.

How do I get to BIOS in Windows 11?

Just open the Run box, input shutdown /r /o, and press Enter. If you want to enter your BIOS faster, just type shutdown /r /o /f /t 00 and click OK. Then, select Troubleshoot > Advanced options > UEFI Firmware Settings and press Restart to boot into system BIOS settings.

How do I open BIOS in Windows 11? How to enter into BIOS in Windows 10 or Windows 11

1. Launch Settings. Head to System > Recovery.
2. In the Advanced boot up menu, click on Troubleshoot > Advanced options > UEFI Firmware Settings.
3. Finally, click on Restart, and your PC will boot into UEFI/BIOS settings from the next time.

How do I get into ASUS BIOS in Advanced mode?

After your computer restarts, please select [Troubleshoot]⑤. Select [Advanced options]⑥. Select [UEFI Firmware Settings]⑦. Click [Restart]⑧, your computer will enter the BIOS configuration after the restart.

Can not enter BIOS setup?

PC Won’t Boot To BIOS (10 Causes, Fixes)

1. Use UEFI Firmware Settings.
2. Fix Faulty Power Connector.
3. Troubleshoot The RAM Sticks.
4. Remove The BIOS Battery To Reset The CMOS.
5. Disconnect External Peripherals.
6. Read The BIOS Error Messages.
7. Fix Possible Boot Device Issues.
8. Update The BIOS.

Can I enter BIOS without a keyboard?

How can I enter BIOS without keyboard? Boot up your computer. When you see the startup logo screen, press CTRL+F10 and then CTRL+F11 to get into the BIOS. (It only works for some computer and you may need to try it for a few times until you get in).

How do I boot into BIOS?

Get into the UEFI / BIOS setup menu and make changes .

BIOS Keys by Manufacturer

1. ASRock: F2 or DEL.
2. ASUS: F2 for all PCs, F2 or DEL for Motherboards.
3. Acer: F2 or DEL.
4. Dell: F2 or F12.
5. ECS: DEL.
6. Gigabyte / Aorus: F2 or DEL.
7. HP: F10.
8. Lenovo (Consumer Laptops): F2 or Fn + F2.

How do I enter BIOS on a laptop?

In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.

Can I enter BIOS from command prompt? Using Command Prompt to Enter BIOS

You can also access BIOS through the Command Prompt. Click on the Start button and type ‘Command Prompt’. It will show ‘Command Prompt’ in search results. Select the ‘Run as administrator’ option from expanded options in the Start menu.

What is UEFI and legacy? UEFI runs in 32-bit and 64-bit, allowing support for mouse and touch navigation. Legacy runs in 16-bit mode that only supports keyboard navigation. It allows a secure boot that prevents the loading of unauthorized applications. It may also hinder dual boot because it treats operating systems (OS) as applications.

How do you get into the BIOS in Windows 10? To enter BIOS from Windows 10

1. Click –> Settings or click New notifications.
2. Click Update & security.
3. Click Recovery, then Restart now.
4. The Options menu will be seen after executing the above procedures.
5. Select Advanced options.
6. Click UEFI Firmware Settings.
7. Choose Restart.
8. This displays the BIOS setup utility interface.

How do I change BIOS settings ASUS?

To access BIOS, you must manually press the correct key or key combination at the appropriate time during bootup.

1. Boot up or restart your Asus notebook.
2. Press “F2” continually when the first text or graphic appears on the screen. …
3. Make whatever changes you require in BIOS. …
4. Press “F10” to save and exit BIOS.

Can’t go to BIOS setup?

PC Won’t Boot To BIOS (10 Causes, Fixes)

1. Use UEFI Firmware Settings.
2. Fix Faulty Power Connector.
3. Troubleshoot The RAM Sticks.
4. Remove The BIOS Battery To Reset The CMOS.
5. Disconnect External Peripherals.
6. Read The BIOS Error Messages.
7. Fix Possible Boot Device Issues.
8. Update The BIOS.

How do I open BIOS on Windows 10?

The simplest way to access the BIOS is with the Start button. Click the Start button, hit the power icon, and then hold Shift while you click “Restart.” Alternatively, you can hit the Start button, in the search bar type “Change Advanced Startup Options” and then hit Enter.

How do I enter BIOS on fast boot?

1. Press F2 during boot to enter the BIOS setup.
2. Go to the Advanced menu > Boot > Boot Configuration tab.
3. Enable the Fast Boot setting.
4. Press F10 to save and exit.

How do I force BIOS in Windows 10?

The simplest way to access the BIOS is with the Start button. Click the Start button, hit the power icon, and then hold Shift while you click “Restart.” Alternatively, you can hit the Start button, in the search bar type “Change Advanced Startup Options” and then hit Enter.

How do I get to BIOS from Command Prompt?

Using the Command Prompt in Windows

Type CMD in the search box. Select Command Prompt or CMD. The Command Prompt window appears. Type wmic bios get smbiosbiosversion and then press Enter.

Can’t access BIOS setup Windows 10?

Power down the machine, unplug it, wait 10 minutes. Reconnect it then boot the machine again then use the command for loading your BIOS .

Try this :

1. Hold down Shift and turn off the system – do not let up until it is all the way off.
2. Wait a minute or two.
3. Hold down the Bios entry key (such as F2) and power on the system.

How do I get to the boot menu without F12? Hold Shift key and click Restart (Easiest)

Click Start > Power Button. Then hold Shift key meantime click Restart. Wait for seconds then you would access to Boot Options Menu.

How do I change my BIOS settings in Windows 10?

Method 2:

1. Click the Start menu and select Settings.
2. Select Update and Security.
3. Click Recovery.
4. Under Advanced startup, click Restart now.
5. Select Troubleshoot.
6. Choose Advanced options.
7. Select UEFI Firmware Settings.
8. Click Restart to restart the system and enter UEFI (BIOS).

Is there another way to enter BIOS? In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.

How do I open UEFI BIOS Windows 10? How to boot into UEFI or BIOS from Windows 11 or Windows 10

1. Click Start and then select Settings.
2. Click Update and Security.
3. On the left side, click Recovery.
4. Under Advanced start-up, click Restart Now.
5. Click Troubleshoot.
6. Click Advanced options.
7. Select UEFI Firmware Settings.

How do I boot UEFI? Select UEFI Boot Mode or Legacy BIOS Boot Mode (BIOS)

1. Access the BIOS Setup Utility.
2. From the BIOS Main menu screen, select Boot.
3. From the Boot screen, select UEFI/BIOS Boot Mode, and press Enter.
4. Use the up and down arrows to select Legacy BIOS Boot Mode or UEFI Boot Mode, and then press Enter.

N’oubliez pas de partager l’article !